In recent years, with the increase of engineering projects, the demand for concrete has soared. In order to save cost and time as much as possible in the project, some construction sites began to use self loading mixer trucks. So what should we pay attention to if the use of self loading mixer is better?
In the past, concrete used to be pulled from the mixing plant at the construction site, but the time cost and vehicle cost are too high in the transportation process. Therefore, many construction companies now adopt the method of on-site production of concrete to save costs.
After the concrete is made, it needs to be transported to the construction site in a very short time due to its own characteristics. For concrete, this time window is very small, and it needs to flow continuously to prevent it from solidification. Watering needs continuous watering, and the interval should not be too long, otherwise it will have a great impact on the project quality.
The self loading mixer truck does not only need to maintain and protect itself in the process of operation, but also should be summarized and considered according to the concrete project object, characteristics, required large conveying interval, concrete construction scheme, concrete pump mode and detailed conditions.
The type and structure of construction and the function of the mixer truck vary randomly. When selecting the model, in addition to considering the amount of concrete pouring, we should also consider the type and structure of construction, construction technical requirements, site conditions and environment, etc. Generally, the primary functional parameters of the selected mixer truck should be consistent with the construction requirements or slightly larger. If the capacity is too large, the utilization rate is low and too small, which will not only satisfy the requirements, but also accelerate the loss of the mixer truck.
Wash the inlet with water before each loading to keep it moist during loading; Fill the clean water tank brought with the vehicle with water together with the loading; Wash the inlet after loading, and clean the residual concrete near the inlet; After unloading at the construction site, wash the discharge chute, and then add 30-40l of clean water to the concrete storage tank; Keep the concrete storage tank rolling forward and slowly when the vehicle returns; Remember to discharge the sewage in the concrete storage tank before the next loading; At the end of each day, the concrete storage tank and the surrounding of the inlet and outlet shall be completely cleaned to ensure that there is no cement and concrete caking.
The wide application of self loading mixer not only saves construction time, but also reduces labor costs. Since the loading mixer plays a connecting role in the whole process, it is not only as simple as improving the construction efficiency, but also more information can be found on the website https://www.zishangliaojiaobanji.cn Consult.