您好,欢迎光临!莱州聚峰机械有限公司网站!

莱州聚峰机械有限公司

定制咨询热线:400-879-1999

新闻资讯

首页>>资讯中心>>新闻资讯自动上料搅拌机小型发动机的作用
联系我们
莱州聚峰机械有限公司

联系人:刘经理

电话:400-879-1999

地址:山东省莱州市206国道与308省道交叉口东南50米

自动上料搅拌机小型发动机的作用

来源:https://www.zishangliaojiaobanji.cn 日期:2021-02-10 发布人:admin
概述:自动上料搅拌机是一种特殊的专用行驶车辆,有特定的工作环境,难免发动机水温过高。每当这种情况发生时,都会对设备产生特定的影响。那如果
自动上料搅拌机是一种特殊的专用行驶车辆,有特定的工作环境,难免发动机水温过高。每当这种情况发生时,都会对设备产生特定的影响。那如果水温太高怎么办?然后编辑会告诉您。
Automatic feeding mixer is a kind of special driving vehicle, which has a specific working environment, so it is inevitable that the engine water temperature is too high. Whenever this happens, it will have a specific impact on the device. What if the water temperature is too high? Then the editor will tell you.
1.在正常道路上,自动供料搅拌车的发动机过热,因此应尽快减速,在树荫下行驶,或在相对凉爽的地方行驶并停止。此时不要急着拖延。
1. On the normal road, the engine of the automatic feeding mixer is overheated, so it should slow down as soon as possible, drive in the shade of trees, or drive in a relatively cool place and stop. Don't delay at this time.
2.打开发动机盖,以怠速运转发动机,然后等待发动机温度逐渐恢复正常。当发动机的水温恢复正常时,请停止发动机。之后,请稍等片刻,直到发动机水温充分下降,然后检查发动机冷却水量。
2. Open the engine cover, run the engine at idle speed, and then wait for the engine temperature to gradually return to normal. When the water temperature of the engine returns to normal, stop the engine. After that, please wait for a moment until the engine water temperature drops sufficiently, and then check the engine cooling water volume.
自上料搅拌车
3.此时,自动混水车发动机的冷却水量可能会严重不足。在补充指定量的冷却水后,可以再次检查冷却系统以确认没有其他异常,然后可以启动发动机并继续运行。另外,检查水箱的百叶窗没有被异物堵塞,风扇叶片是否运转,发动机皮带没有打滑以及发动机水泵是否运转。
3. At this time, the cooling water of the engine of the automatic mixer may be seriously insufficient. After replenishing the specified amount of cooling water, the cooling system can be checked again to confirm that there are no other abnormalities, and then the engine can be started and continue to run. In addition, check that the blinds of the water tank are not blocked by foreign matters, whether the fan blades are running, whether the engine belt is not slipping, and whether the engine water pump is running.
上面的编辑介绍的有关知识是关于自动上料搅拌机小型上水温过高的处理方法,我想每个人都对此有所了解。如果遇到此问题,可以使用上面的方法适当地它。
The above editor's knowledge is about the treatment of small automatic feeding mixer with high water temperature, which I think everyone knows. If you encounter this problem, you can use the above method to solve it properly.
以上的精彩内容来自:自上料搅拌车详细的内容请点击进入我们的网站进行查询对接:https://www.zishangliaojiaobanji.cn/
The above wonderful content comes from: for the detailed content of feeding mixer, please click to enter our website for query and docking: https://www.zishangliaojiaobanji.cn/

阅读/ Recommended reading

小型混凝土搅拌机生产效率高,搅拌质量好,操作简单,重量轻,自动化程度高,操作方便、移动方便、生产效率高等优点,所以使用的人是越来越

解析小型搅拌机的结构及各部分功... 2022-12-21
小型搅拌机整体生产效率受影响的... 2022-12-19
自上料搅拌车的罐体内部部件剖析 2022-12-16
自上料搅拌车离合器活塞密封性的... 2022-12-14
搅拌车结构会根据不同的路况进行... 2022-12-05
利用光照法观察搅拌机机油颜色是... 2022-12-02
混凝土搅拌机的常见三大故障 2022-11-30
自上料搅拌车预防漏油的六大措施 2022-11-28

截屏,微信识别二维码