您好,欢迎光临!莱州聚峰机械有限公司网站!

莱州聚峰机械有限公司

定制咨询热线:400-879-1999

新闻资讯

首页>>资讯中心>>新闻资讯去除自上料搅拌机车身刮痕的方法
联系我们
莱州聚峰机械有限公司

联系人:刘经理

电话:400-879-1999

地址:山东省莱州市206国道与308省道交叉口东南50米

去除自上料搅拌机车身刮痕的方法

来源:https://www.zishangliaojiaobanji.cn 日期:2021-03-02 发布人:admin
概述:1、磨损伤痕的处理:1 Treatment of wear scar:一体车受到摩擦而造成的伤痕,我们可以为车辆涂上镀膜剂,涂抹过程要注意涂抹均匀。For
1、磨损伤痕的处理:
1. Treatment of wear scar:
一体车受到摩擦而造成的伤痕,我们可以为车辆涂上镀膜剂,涂抹过程要注意涂抹均匀。
For the scars caused by friction on the all-in-one vehicle, we can apply the coating agent to the vehicle, and pay attention to the even coating process.
2、保险杠伤痕的修补:
2. Repair of bumper scar:
保险杠的伤痕处理方法是将毛刺削,坑洼部分涂上油灰使之平滑。专用油灰,准备各种颜色,选择较接近的颜色。与装载机式一体车车身同色的保险杠,喷漆很重要。
The treatment method of bumper scar is to cut the burr and coat the pothole with putty to make it smooth. Special putty, prepare all kinds of colors, choose a closer color. It is very important to paint the bumper in the same color as the body of loader type all-in-one vehicle.
3、车身老化、伤痕的处理:
3. Body aging, scar treatment:
不论什么样的一体车都会有或大或小的伤痕。如果是不太醒目的伤痕,可以不用管它;如果一体车只是很浅的刮伤表漆,立即用混合剂处理,擦拭方法为直线擦拭。伤痕消失后,用更细的混合剂擦拭之后再打上蜡。
自上料搅拌机
No matter what kind of all-in-one car, there will be big or small scars. If it's not obvious, don't worry about it; if it's only a very shallow scratch on the surface paint of the all-in-one car, use the mixture immediately and wipe it in a straight line. After the scar disappears, wipe it with a finer mixture and then wax it.
4、较深伤痕的修补:
4. Repair of deep wounds:
很深但细长的伤痕,用彩色油灰可以修补得很好。伤痕处用砂纸,不要随便将伤痕面扩大,重要的是将脏污干净。油灰要仔细得涂抹,是指完全进入内部。然后涂上混合剂、上蜡,结束工作。
Deep but slender scars can be repaired well with colored putty. Use sandpaper at the scar, don't enlarge the scar surface casually, the important thing is to clean the dirt. The putty should be applied carefully, which means it is completely inside. Then apply the mixture and wax to finish the work.
5、刮伤、表漆剥落的修补:
5. Repair of scratch and paint peeling off:
较深的刮痕,可以用修饰漆进行修补。用笔尖一点一点地点上,然后等漆完全干。
Deep scratches can be repaired with paint. Point by point with the nib and wait for the paint to dry completely.
6、凹陷的修补保养窍门:
6. Tips for repair and maintenance of sags:
凹陷处理是车身保养中叫麻烦的工作之一,要打好底子。喷漆时注意不要使涂料向周围扩散。
Sag treatment is one of the troublesome tasks in body maintenance. First of all, it is necessary to lay a good foundation. Pay attention not to spread the paint around when painting.
有了自上料搅拌机上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的网站:https://www.zishangliaojiaobanji.cn或者来电咨询,我们会尽全力为您
With the summary of self feeding mixer, we hope to help our customers. If there is anything you don't understand or ask for help, please click our website: https://www.zishangliaojiaobanji.cn Or call consultation, we will try our best to solve for you

阅读/ Recommended reading

小型混凝土搅拌机生产效率高,搅拌质量好,操作简单,重量轻,自动化程度高,操作方便、移动方便、生产效率高等优点,所以使用的人是越来越

解析小型搅拌机的结构及各部分功... 2022-12-21
小型搅拌机整体生产效率受影响的... 2022-12-19
自上料搅拌车的罐体内部部件剖析 2022-12-16
自上料搅拌车离合器活塞密封性的... 2022-12-14
搅拌车结构会根据不同的路况进行... 2022-12-05
利用光照法观察搅拌机机油颜色是... 2022-12-02
混凝土搅拌机的常见三大故障 2022-11-30
自上料搅拌车预防漏油的六大措施 2022-11-28

截屏,微信识别二维码