您好,欢迎光临!中科聚峰机械有限公司网站!

莱州聚峰机械有限公司

定制咨询热线:400-879-1999

新闻资讯

首页>>资讯中心>>新闻资讯>>立式环流搅拌机的特点及介绍
联系我们
莱州聚峰机械有限公司

联系人:刘经理

电话:400-879-1999

地址:山东省莱州市206国道与308省道交叉口东南50米

立式环流搅拌机的特点及介绍

来源:https://www.zishangliaojiaobanji.cn 日期:2022-03-21 发布人:admin
概述:立式环流搅拌机采用大排量、螺旋浆式的推进叶轮、叶桨作为主要水力部件,运行时潜水电机带动推进式叶轮、叶桨工作,使流体产生一定流速和流
立式环流搅拌机采用大排量、螺旋浆式的推进叶轮、叶桨作为主要水力部件,运行时潜水电机带动推进式叶轮、叶桨工作,使流体产生一定流速和流场,向水池底部和四周形成环状主流带。因为主流带流速较大,形成了以其为中心的紊流区域,促使整个水体形成上下翻动的大循环,从而实现大面积立体环流搅动,使池中污泥始终处于翻动和悬浮状态,达到了均匀、温和搅动的目的,提高了处理效果。
The vertical circulation mixer adopts large displacement, propeller type propulsion impeller and blade propeller as the main hydraulic components. During operation, the submersible motor drives the propulsion impeller and blade propeller to work, so as to generate a certain flow rate and flow field, and form an annular mainstream belt to the bottom and around the pool. Because the flow velocity in the main stream zone is large, a turbulent region centered on it is formed, which promotes the whole water body to form a large cycle of turning up and down, so as to realize large-area three-dimensional circulation stirring, so that the sludge in the tank is always in the state of turning and suspension, achieve the purpose of uniform and mild stirring, and improve the treatment effect.
立式环流搅拌机的性能特点:
Performance characteristics of vertical circulation mixer:
1、结构紧凑,体积小,重量轻,操作维护简单、安装检修方便、使用寿命长。
1. Compact structure, small volume, light weight, simple operation and maintenance, convenient installation and maintenance and long service life.
小型搅拌机
2、叶轮具有良好的水力设计结构,后掠式叶片具有自洁功能可防杂物缠绕、堵塞。
2. The impeller is of self-cleaning and self-cleaning structure and has good anti clogging function.
3、与曝气系统混合使用可使能耗大幅度降低,充氧量提高,有效防止沉淀。
3. Mixing with aeration system can greatly reduce energy consumption, increase oxygen charging and effectively prevent sedimentation.
4、电机绕组绝缘等级为F级,防护等级为IP68,选用一次性润滑免维护轴承,具有油室泄露检测,使电机的工作更加平稳。
4. The insulation grade of the motor winding is class F and the protection grade is IP68. The disposable lubrication maintenance free bearing is selected, and the oil chamber leakage detection is provided to make the operation of the motor more stable.
5、两道独立的机械密封,机械密封的摩擦付材质为碳化钨。所有外露紧固件均为不锈钢材质。
5. Two independent mechanical seals. The friction pair of the mechanical seal is made of tungsten carbide. All exposed fasteners are made of stainless steel.
6、良好的电缆密封设计,排除了电缆漏水的隐患。
6. Good cable sealing design eliminates the hidden danger of cable leakage.
7、标准部件采用点解分离技术,可以有效防止腐蚀。
7. The standard parts adopt point separation technology, which can effectively prevent corrosion.
小型搅拌机专注为客户提供满意的服务,更多的精彩内容请点击进入我们的网站https://www.zishangliaojiaobanji.cn,我们会有更多精彩内容等您查看.
Small blenders focus on providing customers with satisfactory services. For more wonderful contents, please click to enter our website https://www.zishangliaojiaobanji.cn , we will have more wonderful content for you to check

推荐阅读/ Recommended reading

自上料搅拌车卸料后,卸料门关闭,但没有关闭信号,导致程序不能运行,原因可能有哪几种呢?又可以怎么去检修呢?下面小编为您解说。 Since

小型搅拌机突然跳闸怎么维修 2022-09-30
小型混凝土搅拌机转不动是什么原因 2022-09-30
使用搅拌机发动机的注意以及定期... 2022-09-28
自上料搅拌车发动机的防暑技巧推荐 2022-09-23
自上料搅拌机的平安操作注意事项 2022-09-19
自上料搅拌车的特征有什么? 2022-09-17
小型混凝土搅拌机要进行正确的系... 2022-09-17
小型搅拌机的运行特点是怎样的? 2022-09-17

截屏,微信识别二维码