The self feeding mixer will cause large and small problems in case of scalding, water ingress, moisture regain, and long-term continuous operation. If there is any fault, please stop using it immediately. Now let's talk about the problems that should be paid attention to during the transportation of the self loading mixer.
Never let the self feeding mixer truck break down on the road, or it will be troublesome if the tank is stuffy. Generally, the concrete can't be stopped for more than 2 hours, and the concrete of C40 level can't be stopped basically.
Before ignition, check the engine oil, antifreeze, lubricating oil and cooling water, and add them again if insufficient. After the car starts, let the tank rotate at a low speed. Check the tyre pressure around the car to see if there is a flat tyre. Then use a screwdriver to remove the stones in the tyre seams and check if there are nails or something!
Check the lights again, especially the waist lights. Make sure to shine on the edge of the tire. The construction site will often pile up reinforcement and other things, and the tire side is weak. Wipe the rear-view mirrors and window glass on both sides with a rag. The road conditions on the construction site are complex and the light is bad. The sight must be guaranteed first!
Make sure there is enough water and water reducer in the water tank. The material is too dry for various reasons. When there is no water to add and the material cannot be discharged, the water reducer is a lifesaving straw. Make sure that the mixing tank is stopped, because if the tank is rotating at a high speed when the engine is started, the instantaneous force will be great, which will hurt the reducer.
Whether the handle is moved from mixing to discharging or from discharging to mixing, it should be stopped at the stop position and then moved to the next operation position. If you want to confirm any other precautions, please come to our website https://www.zishangliaojiaobanji.cn Consult!