您好,欢迎光临!莱州聚峰机械有限公司网站!

莱州聚峰机械有限公司

定制咨询热线:400-879-1999

新闻资讯

首页>>资讯中心>>新闻资讯自上料搅拌车的罐体内部部件剖析
联系我们
莱州聚峰机械有限公司

联系人:刘经理

电话:400-879-1999

地址:山东省莱州市206国道与308省道交叉口东南50米

自上料搅拌车的罐体内部部件剖析

来源:https://www.zishangliaojiaobanji.cn 日期:2022-12-16 发布人:admin
概述:通过有关的自上料搅拌车罐体剖视图,我们可见其罐体内部主要分为八大部分组成,分为有密封管,叶片,拌叶,封头板,拌筒壳体,拌筒滚道,连
通过有关的自上料搅拌车罐体剖视图,我们可见其罐体内部主要分为八大部分组成,分为有密封管,叶片,拌叶,封头板,拌筒壳体,拌筒滚道,连接法兰,检修孔。下面来简单分析一番。
Through the sectional view of the tank body of the mixer truck, we can see that the tank body is mainly composed of eight parts, including sealing pipe, blade, mixing blade, head plate, mixing cylinder shell, mixing cylinder raceway, connecting flange and manhole. Here is a brief analysis.
密封管A为漏斗状,口径大,能保证顺利进料,防止混凝土溢出。
The sealing pipe A is funnel shaped with large diameter, which can ensure smooth feeding and prevent concrete overflow.
叶片B呈曲面状,有助于低坍落度混凝土出料性能。
Blade B is curved, which is conducive to the discharge performance of low slump concrete.
拌叶C具有良好的搅拌性能,有利于保持预拌混凝土的质量。
The mixing blade C has good mixing performance, which is conducive to maintaining the quality of ready mixed concrete.
封头板D为高强度钢板整体滚轧,和封头加强板焊接后具有可靠的钢度。
Head plate D is rolled integrally with high-strength steel plate and has reliable rigidity after welding with head reinforcement plate.
拌筒壳体E和各类叶片均由搅拌车专用高强度耐磨钢板制成,具有非常高的耐磨性。
The mixing drum shell E and various blades are made of high-strength wear-resistant steel plates specially used for the mixer truck, which have very high wear resistance.
自上料搅拌车
拌筒滚道F整体轧制,具有良好的耐磨性能,滚道用于支撑拌筒于托轮上。
The mixing drum raceway F is rolled as a whole and has good wear resistance. The raceway is used to support the mixing drum on the supporting wheel.
连接法兰G与减速箱连接,支撑拌筒于机架上。
The connecting flange G is connected with the reducer and supports the mixing drum on the rack.
检修孔H用于紧急检修用。
Manhole H is used for emergency maintenance.
搅拌车在运输过程中会始终保持搅拌筒转动,以保证所运载的混凝土不会凝固。运送完混凝土后,通常都会用水冲洗搅拌筒内部,防止残余混凝土硬化占用空间,使搅拌筒的容积越来越少。所以有关的内容要多加了解,关注我们https://www.zishangliaojiaobanji.cn了解更多!
The mixer truck will always keep the mixing drum rotating during transportation to ensure that the concrete it carries will not solidify. After the concrete is transported, the inside of the mixing drum is usually flushed with water to prevent the residual concrete from hardening and occupying space, so that the volume of the mixing drum becomes less and less. Therefore, we should learn more about relevant contents and pay attention to us https://www.zishangliaojiaobanji.cn Learn more!

阅读/ Recommended reading

小型混凝土搅拌机生产效率高,搅拌质量好,操作简单,重量轻,自动化程度高,操作方便、移动方便、生产效率高等优点,所以使用的人是越来越

解析小型搅拌机的结构及各部分功... 2022-12-21
小型搅拌机整体生产效率受影响的... 2022-12-19
自上料搅拌车的罐体内部部件剖析 2022-12-16
自上料搅拌车离合器活塞密封性的... 2022-12-14
搅拌车结构会根据不同的路况进行... 2022-12-05
利用光照法观察搅拌机机油颜色是... 2022-12-02
混凝土搅拌机的常见三大故障 2022-11-30
自上料搅拌车预防漏油的六大措施 2022-11-28

截屏,微信识别二维码