自上料搅拌机

24小时服务热线

400-879-1999

点击拨打服务热线:400-879-1999

常见问题

首页>>资讯中心>>常见问题>>自动上料一体搅拌车常见问题解决方法

自动上料一体搅拌车常见问题解决方法

来源:https://www.zishangliaojiaobanji.cn 日期:2021-05-07 发布人:admin
概述:如果长时间使用,油封会磨损。解决方案:只需更换新的油封即可。If used for a long time, the oil seal will be worn Soluti
如果长时间使用,油封会磨损。解决方案:只需更换新的油封即可。
If used for a long time, the oil seal will be worn. Solution: just replace the new oil seal.
如果长时间不更换机油,则滤芯的质量会下降,机油会变得太脏,并且油封的磨损会更快。解决方案:尽快更换液压油和滤芯。
If the oil is not changed for a long time, the quality of the filter element will decline, the oil will become too dirty, and the oil seal will wear faster. Solution: change the hydraulic oil and filter element as soon as possible.
驱动轴失衡并剧烈振动,导致主轴摆动油封磨损。解决方案:及时固定并更换轴。
The unbalance and violent vibration of the drive shaft lead to the wear of the spindle swing oil seal. Solution: fix and replace the shaft in time.
液压油会变质和乳化,降低润滑性能并加速油封的磨损。解决方案:尽快更换液压油和滤芯。在严重的情况下,需要清洁系统。
Hydraulic oil will deteriorate and emulsify, reduce the lubrication performance and accelerate the wear of oil seal. Solution: change the hydraulic oil and filter element as soon as possible. In severe cases, the system needs to be cleaned.
泵支架松动,泵打开,泵固定螺栓松动,导致整个液压泵振动并磨损油封。解决方案:始终检查并消除全自动上料一体搅拌车发生故障的可能性,以防止并避免发生故障。
自上料搅拌车
The pump bracket is loose, the pump is opened, and the fixing bolts of the pump are loose, which leads to the vibration of the whole hydraulic pump and the wear of the oil seal. Solution: always check and eliminate the possibility of failure of fully automatic feeding integrated mixer to prevent and avoid failure.
自动上料一体搅拌车系统的回油不畅,回油管和散热器堵塞,导致电动机壳体内的压力升高,并且油封泄漏。解决方案:清除堵塞物并稳定回油回路。
The oil return of the automatic feeding integrated mixer system is not smooth, and the oil return pipe and radiator are blocked, which leads to the pressure rise in the motor housing and the oil seal leakage. Solution: remove the blockage and stabilize the oil return circuit.
如果散热器不散热,油的温度将变得太高,粘度和润滑性将降低,油封将过热并且密封将无法工作。
If the radiator does not dissipate heat, the temperature of the oil will become too high, the viscosity and lubricity will be reduced, the oil seal will overheat and the seal will not work.
解决方案:清除散热器上的障碍物并冷却系统,以防止泵马达磨损。在严重的情况下,有必要停止和停止发动机,并用水冲洗泵的电动机和散热器壳体以达到冷却效果。
Solution: remove the obstacles on the radiator and cool the system to prevent the pump motor from wearing. In severe cases, it is necessary to stop and stop the engine and flush the pump motor and radiator housing with water to achieve cooling effect.
在冬季运行期间,由于预热不足,油温过低,油封和油封无法达到理想的工作温度。对策:启动时停止油箱,以怠速运转10至20分钟,并在机油温度恢复正常时更换油箱。
During the winter operation, due to insufficient preheating and low oil temperature, the oil seal and oil seal can not reach the ideal working temperature. Countermeasures: stop the oil tank when starting, run at idle speed for 10 to 20 minutes, and replace the oil tank when the oil temperature returns to normal.
自动上料一体搅拌车的液压泵轴端的油封很脆弱。严格遵守相关法规可以有效防止许多机油泄漏。如果遇到漏油,则需要冷静下来并确定问题的具体原因。
The oil seal of the hydraulic pump shaft end of the automatic feeding integrated mixer is very fragile. Strict compliance with relevant regulations can effectively prevent many oil leakage. In case of oil leakage, you need to calm down and determine the specific cause of the problem.
购买产品重要的是质量,选择商家选择是诚信,自上料搅拌车真诚的为广大客户提供优良的服务,欢迎大家在网站:https://www.zishangliaojiaobanji.cn下方留言咨询.
The most important thing to buy products is quality. Choosing merchants is honesty. Self feeding mixer sincerely provides excellent service for customers. Welcome to visit our website: https://www.zishangliaojiaobanji.cn Below message consultation
此文关键词:自上料搅拌车

推荐阅读/ Recommended reading

其实轻量化这个词很好理解,轻,轻量型的发动力,更环保,轻量型的车身,自重轻,不超重,更安全,是一款安全又环保的搅拌车。混凝土搅拌车

自动上料搅拌车购买了不会操作怎... 2021-06-16
高速搅拌机的电动机功率的要求特点 2021-06-15
搅拌车生产质量应该注意什么? 2021-06-10
自上料搅拌机转向泵出现问题怎么... 2021-06-09
自动上料搅拌车搅拌轴停止转动怎... 2021-06-08
自上料搅拌机搅拌斗由哪些内容组... 2021-06-07
自上料搅拌机搅拌斗由哪些内容组... 2021-06-07
自上料搅拌机防止沾罐快装快卸是... 2021-06-04

截屏,微信识别二维码

微信号:1234567

点击微信号复制,添加好友

 打开微信