您好,欢迎光临!莱州聚峰机械有限公司网站!

莱州聚峰机械有限公司

定制咨询热线:400-879-1999

常见问题

首页>>资讯中心>>常见问题安装维护自上料搅拌车拌和容器使用
联系我们
莱州聚峰机械有限公司

联系人:刘经理

电话:400-879-1999

地址:山东省莱州市206国道与308省道交叉口东南50米

安装维护自上料搅拌车拌和容器使用

来源:https://www.zishangliaojiaobanji.cn 日期:2021-07-02 发布人:admin
概述:自上料搅拌车拌和设备的用处、分类在挑选拌和容器时,应根据出产规模(即物料处理量)、拌和操作意图和物料特性确认拌和容器的形状和尺寸,在
自上料搅拌车拌和设备的用处、分类在挑选拌和容器时,应根据出产规模(即物料处理量)、拌和操作意图和物料特性确认拌和容器的形状和尺寸,在确认拌和容器的容积时应合理挑选装料系数,尽量进步设备的利用率。
Use and classification of mixing equipment of self loading mixer when selecting mixing container, the shape and size of mixing container should be confirmed according to production scale (i.e. material handling capacity), mixing operation intention and material characteristics. When confirming the volume of mixing container, the loading coefficient should be selected reasonably to improve the utilization rate of equipment as far as possible.
假如没有特殊需要,釜体一般宜选用常用的立式圆筒形容器,并挑选适合的筒体高径比(或容器装液高径比)。若有传热要求,则釜体外须设置夹套结构。夹套品种有全体夹套、螺旋挡板夹套、半管夹套、蜂窝夹套,传热效果依次进步但制作本钱也相应增加。
If there is no special need, the most commonly used vertical cylindrical vessel should be selected for the kettle body, and the suitable height diameter ratio (or liquid loading height diameter ratio) should be selected. If heat transfer is required, jacket structure should be set outside the kettle. There are all kinds of jacket, spiral baffle jacket, half pipe jacket and honeycomb jacket. The heat transfer effect is improved in turn, but the production cost is also increased correspondingly.
当拌和釜卧式放置时,大多进行半釜操作。因此卧式釜与立式釜相比有更多的气-液触摸面积,因此卧式釜常用于气-液传质进程,如气-液吸收或从高粘度液体中脱除少数易挥发物质,另一方面,卧式釜的料层较浅,有利于拌和器将粉末搅动,并可借拌和器的高速反转使粉体抛扬起来,使粉体在瞬间失重状态下进行混合。
When the mixing kettle is placed horizontally, half kettle operation is mostly carried out. Therefore, the horizontal kettle has more gas-liquid contact area than the vertical kettle, so the horizontal kettle is often used in gas-liquid mass transfer process, such as gas-liquid absorption or removal of a few volatile substances from high viscosity liquid. On the other hand, the material layer of the horizontal kettle is shallow, which is conducive to stirring the powder by the mixer, and the powder can be thrown up by the high-speed reversal of the mixer, The powder is mixed under the condition of instant weight loss.
自上料搅拌车
拌和容器的材料要满足出产工艺的要求,例如耐压、耐温、耐介质腐蚀,以及确保产品清洁等。因为材料的不同,拌和容器的制作工艺、结构也有所不同,因此可分为钢制拌和设备、搪玻璃拌和设备和带面料的拌和设备等。装面料的意图是为了耐蚀或保护产品的清洁,面料的品种许多,首要有不锈钢、铝、钛、铅、镍、锆、耐酸瓷砖、辉绿岩板、橡胶等。
The material of mixing container shall meet the requirements of production process, such as pressure resistance, temperature resistance, medium corrosion resistance, and product cleaning. Because of the different materials, the manufacturing process and structure of mixing container are also different, so it can be divided into steel mixing equipment, glass lined mixing equipment and mixing equipment with fabric. There are many kinds of fabrics, including stainless steel, aluminum, titanium, lead, nickel, zirconium, acid resistant ceramic tile, diabase board, rubber, etc.
今日就是小编给大家编写的自上料搅拌车的相关知识,更多的精彩内容请点击我们的网站:https://www.zishangliaojiaobanji.cn欢迎大家在网站留言,或者拨打电话沟通交
Today is the related knowledge of self loading mixer compiled by Xiaobian. For more wonderful content, please click our website: https://www.zishangliaojiaobanji.cn Welcome to leave a message on the website, or call to communicate

阅读/ Recommended reading

小型混凝土搅拌机生产效率高,搅拌质量好,操作简单,重量轻,自动化程度高,操作方便、移动方便、生产效率高等优点,所以使用的人是越来越

解析小型搅拌机的结构及各部分功... 2022-12-21
小型搅拌机整体生产效率受影响的... 2022-12-19
自上料搅拌车的罐体内部部件剖析 2022-12-16
自上料搅拌车离合器活塞密封性的... 2022-12-14
搅拌车结构会根据不同的路况进行... 2022-12-05
利用光照法观察搅拌机机油颜色是... 2022-12-02
混凝土搅拌机的常见三大故障 2022-11-30
自上料搅拌车预防漏油的六大措施 2022-11-28

截屏,微信识别二维码