1. Operators must work with certificates. It is forbidden to hand over the automatic feeding mixer to unlicensed personnel for operation. During operation, they should concentrate on correct operation and shall not leave their posts without authorization.

2、作业前应检查自动上料搅拌车的固定、离合器、制动器、滑轮、钢丝绳、传动装置、上料斗限位、电气线路、保护接零或接地线等，如有异常必须排除。

2. Before operation, check the fixing, clutch, brake, pulley, steel wire rope, transmission device, hopper limit, electrical circuit, protective neutral connection or grounding wire of the automatic feeding mixer. If there is any abnormality, it must be eliminated.

3、实行多班作业时，应执行交接班制度，交班人应认真填写交班记录，接班人对提升机检查确认无误并签字后，方可进行工作。

3. When multi shift operation is implemented, the shift handover system shall be implemented. The shift handover person shall carefully fill in the shift handover record. The work can be carried out only after the successor checks and confirms the hoist and signs it.

4、必须按规定的技术性能合理使用自动上料搅拌车。

4. The automatic feeding mixer must be used reasonably according to the specified technical performance.

5、自动上料搅拌车升起上料斗后，料斗下方严禁人员进入，清理料斗下方时，必须挂上保险链，自动上料搅拌车搅拌桶内有人进入清理和维修作业时，应拉下开关箱内的隔离开关，锁好开关箱，以免误操作伤人。

5. After the automatic feeding mixer raises the hopper, no personnel are allowed to enter under the hopper. When cleaning the hopper, a safety chain must be hung. When someone enters the mixing drum of the automatic feeding mixer, pull down the isolation switch in the switch box and lock the switch box to avoid personal injury by misoperation.

6、自动上料搅拌车作业完毕，应将自动上料搅拌车清理干净，切断电源，锁好开关箱。

6. After the operation of the automatic feeding mixer truck is completed, clean the automatic feeding mixer truck, cut off the power supply and lock the switch box.