The quality of the self loading mixer truck must be guaranteed so that the equipment can be better used for construction. It is very important for the operators to carefully check the self loading mixer truck before driving. Let's take a look at the relevant content.
Check whether there are large cracks or cracks in the seals of the self loading mixer. If the seal is broken, it can be repaired with adhesive. In particular, large crack areas can be easily filled with excellent adhesive on the seal. Of course, if the seal is seriously damaged or damaged, please replace it with a new one.
Sealing doors and gates is a relatively difficult part. More stringent sealing requirements. The sealing part is long, the cross-sectional shape of the sealing part is different, and the door is often opened and closed. Install the tee and cross sealing gasket on the dump mixer, and install the four-way sealing structure of the front column, top beam and side beam. This multi-channel sealing strip is usually placed in the gap between the front doors. In addition to sealing, it also has the function of reducing vehicle noise.
After the window glass is damaged, the driver shall check whether the sealing strip is damaged when replacing the glass. In addition to being able to easily pull up and lift the window glass, you should also pay attention to the sealing around the window glass, because the window often cannot be restored to its original state after maintenance. If the gap between the glass and the glass can is uneven, the rubber strip has poor contact with the glass and the glass can, and the driver can easily pull the sealing strip by hand.
During construction, operators must work with certificates. It is strictly prohibited to hand over the automatic feeding mixer to unlicensed personnel for operation. Concentrate on the work, operate correctly, and do not leave the post without authorization. Before operation, check the fixing device, clutch, brake, pulley, steel wire rope, transmission device, hopper limit, circuit, protective zero line or grounding wire of the self feeding mixer. If there is any abnormality, it must be eliminated.
In case of multi shift operation, the shift handover system shall be implemented, and the shift handover record shall be carefully filled in. The self loading mixer must be used reasonably according to the specified technical performance.
When someone enters the mixing tank of the loading mixer truck for cleaning and maintenance, pull down the isolating switch in the switch box and lock the switch box to avoid misoperation injury. After the automatic feeding mixer truck is completed, clean the automatic feeding mixer truck, cut off the power supply and lock the switch box.
Therefore, it is necessary to strengthen the driving education of operators, enhance the awareness of independent security, and establish a good transportation promotion order, so that each employee can consciously abide by the relevant regulations in transportation promotion. For more information, please visit www.zishangliaojiaobanji.com Cn bar, hope to give help!