The warm season of the year is spring, but do you know how to maintain the mixer truck often used in construction sites in spring? Here are some tips for spring maintenance of mixer truck. Let's have a look.
(1) If the temperature rises, do not forget to remove the heat shield at the front of the cab.
(2) Wash all parts of the car with water, wet the firmly bonded dirt and bird droppings in advance, and then wash all parts of the car with high-pressure water from top to bottom. When cleaning the chassis, the water pressure should be higher.
(3) After washing the car, try not to wash the car in strong light or when the car is hot, which may cause the paint layer to fall off. According to the situation of your own car, you can also choose paint maintenance services such as waxing, coating and glazing.
It is the heart of the mixer, and the oil is the blood of the heart, so it is very important to change the oil on time for the maintenance of the mixer.
(1) Check the oil storage capacity of each oil tank in the engine compartment and replenish the insufficient oil in time.
(2) Check whether the oil easy to mix with water is deteriorated. If the oil is abnormal, replace it immediately.
(3) If the oil viscosity is too high, replace it with summer lubricating oil in time.
(1) Check whether the working performance of the battery is good. If necessary, go to the maintenance station for testing.
(2) If you want to stop for a long time, it is recommended to unplug the battery cable. However, even if the batteries are stored separately, self discharge will occur, so it is necessary to charge the batteries regularly.
Timing belt maintenance
The timing belt needs to be replaced regularly. The main function of the timing belt is to drive the valve distribution mechanism of the engine, so that the intake and exhaust valves of the engine can be opened or closed at an appropriate time, so as to ensure that the cylinder of the engine can normally aspirate and exhaust. In some models, the timing belt is also responsible for driving the water pump.
The belt of the self loading mixer is a rubber component. With the increase of the engine working time, the timing belt and its accessories, such as timing belt tensioner, timing belt tensioner and water pump, will be worn or aged.
Therefore, for engines equipped with timing belts, the manufacturer will have strict requirements. The timing belts and accessories will be replaced regularly within the specified cycle. The replacement cycle will vary with the structure of the engine. Generally, they should be replaced when the mixer truck runs to 60000 ~ 100000 km. The specific replacement cycle should be subject to the instructions in the maintenance manual of the mixer truck.
The above is the content to be explained today. I believe that after reading the description of this article, you can have a certain understanding of the product. I hope the above content can help you. In addition, if you want to learn more about our website, you can pay more attention to our website at www.zishangliaojiaobanji cn。