After using the small concrete mixer, the user is very upset to clean up the residual concrete in the drum. Once it is dry, it is difficult to clean up. This is a headache for the user. What can be done to quickly clean up the residual concrete in the drum?
After using the small concrete mixer, the cleaning work must be done. It is not recommended to clean after one day of use, which will cause the dry concrete to stick to the small concrete mixer.
If you encounter this situation, you will patiently smash or pry slowly, and the time will be wasted on these details. Such a cleaning process will also damage the small mortar mixer.
After each use and before the concrete is dry, wash it with water immediately. Although there are many times of cleaning in a day, it can reduce the concrete sticking to it and waste time and energy cleaning the drum.
When cleaning the mixer, you can first put some stones in the mixer to mix and polish the residual concrete, and then clean it with iron chisel and steel hammer, which is convenient and fast. In fact, when we run out of the mixer, it is much more convenient to clean it in time.
Avoid a large amount of concrete sticking to the mixing drum wall later. If it is difficult to clean the sticky concrete in the small concrete mixer, it is forbidden to strike it with a sledge hammer in case of damage to the drum, and only a small chisel can be used to clean it slowly.
The above is the relevant answers to the questions. If you want to get more relevant information, please follow us https://www.zishangliaojiaobanji.cn Website!