There will always be corrosive subst
There will always be corrosive substances in the long-term use of the mixer. What methods can be used to remove them? Now let's have a brief understanding.
Add an appropriate amount of industrial acetic acid, or dissolve an appropriate amount of ammonium chloride in water to prepare a solution, inject it into the mixer tank, and rotate it intermittently for several times. Note: hydrochloric acid and dilute sulfuric acid with strong acidity and strong corrosiveness shall not be used, and concentrated dilute nitric acid shall not be used.
The water tank equipped with the mixer should put the water into the tank after unloading each time. When it returns, it should be agitated and driven. After reaching the mixing station, the water should be discharged to receive the materials. The outer surface of the tank can be cleaned when the water tank is filled with water. If the covered cement slurry has set, it can only be cleaned slowly. Can't really contact the manufacturer to provide professional solutions.
The maintenance of the mixer chassis is very important. When driving the automatic feeding mixer in the rain, the lubricating oil is easy to wash off the rain, and the chassis is easy to be corroded. Therefore, it is important to pay attention to the cleaning and rust prevention of the chassis of the automatic feeding mixer. If the parts of the mixer are dirty, the filtering effect will deteriorate. Excessive impurities in the oil cylinder will increase the wear of the parts and increase the possibility of failure; If it is seriously blocked, the vehicle will not work normally.
Cleaning method of small concrete mixer
Wash the inlet with water before each loading to keep the inlet moist during loading.
Fill the self-contained cleaning water tank with water while loading.
After loading, wash the inlet and clean the residual concrete near the inlet.
After unloading at the construction site, flush the discharge tank, and then add 30-40l of cleaning water to the concrete storage tank to keep the concrete storage tank rotating slowly in the forward direction during the return of the locomotive.
Remember to discharge the sewage in the concrete storage tank before the next loading.
Clean the concrete storage tank and the surrounding of the inlet and outlet at the end of each day to ensure that there is no cement and concrete caking.
If you forget to clean it in time once you are careless, use an air gun to clean it in time afterwards to avoid the loss of tank cleaning.
Any machine will be lost during use. If it is not cleaned in time, it will damage the mixing bucket and affect the service life of the mixer. Therefore, it is very important to clean the small concrete mixer. For more information, please visit our website https://www.zishangliaojiaobanji.cn Let's see.