Small mixers, which are widely used, can not only be used as the main machine of concrete mixing plant, but also can be produced alone. Let's talk about the operating characteristics of small mixers.
Cyclicity: loading, mixing and discharging are carried out periodically. The layout is simple and reliable, and the cooperation ratio and mixing quality are simply controlled. It is widely used.
Continuous type: continuous tasks, high productivity, suitable for projects with large concrete use.
Self falling type: the mixing cylinder rotates to raise the material to a certain height and then falls down by itself. The cylinder wall and blades are less worn, which is suitable for mixing plastic and semi plastic concrete.
Forced type: the materials in the cylinder are fully stirred by the forced effect of blades and scrapers on the rotating shaft. The blade and cylinder wall are severely worn, so it is necessary to install lining plates.
How to operate?
1. Before starting the mixer, check whether each controller is in good condition;
2. The mixer must be cleaned after use, especially in winter. Before use, there must be no foreign matters in the drum, which can extend the service life;
3. The mixer shall be placed in a solid place, and shall be stabilized with a support or a leg cylinder. The support shall not be replaced by tires;
4. When the mixer is running, it is strictly prohibited to put tools into the drum, and more attention should be paid to safety;
5. When the mixer is raised, for safety, it is strictly forbidden for personnel to pass or stay under the hopper, and the hopper of the mixer shall be fixed after the work is completed;
In addition, during the on-site maintenance of the mixer, the hopper of the mixer shall be fixed, the power supply shall be cut off, and when entering the mixer drum, someone shall be outside to monitor, so as to consider more for safety. Come to our website for more information https://www.zishangliaojiaobanji.cn Consult.