It is inevitable to encounter various problems in the use of the self loading mixer, such as speed loss. Now we will analyze the reasons for the speed loss of the self loading mixer, so that you can use and construct with better quality.
1. As a result, the speed of the self feeding mixer truck is too slow, because the clearance of the solenoid valve is too large, the oil supply is insufficient, which causes the engine to lose speed.
2. It is recommended to check whether the oil is deteriorated, whether there are impurities in the oil collector and whether the oil circuit is blocked.
3. Poor fuel quality or high fuel water content of the engine will lead to insufficient power of the engine of the self loading mixer, resulting in speed loss.
4. In addition, the wrong valve clearance, wrong fuel injection timing and damaged turbocharger of the self loading mixer will cause speed loss.
In addition, the time for transporting concrete from the charging mixer truck shall not exceed the time specified by the mixing plant. During the transportation of concrete, the mixing drum shall not stop for a long time to prevent segregation of concrete. The driver shall always observe the concrete condition, report to the dispatching room in time in case of any abnormality, and apply for handling.
The above is the reason for the speed loss of the self feeding mixer. Is there anything you don't know about it? You can follow the small editor to our website https://www.zishangliaojiaobanji.cn Consult!